Home
ꄲ
Electrical Products
ꄲ
Circuit Breaker / Contactor / Fuses
ꄲ
SCHNEIDER RM35HZ21FM FREQUENCY CONTROL PROTECTION RELAY, 250VAC, 50HZ
SCHNEIDER RM35HZ21FM FREQUENCY CONTROL PROTECTION RELAY, 250VAC, 50HZ
0073/12-16Z
Specifications
| Range of produc | Harmony Control Relays |
|---|---|
| Relay type | Frequency control relays |
| Product or component type | Frequency control relay |
| Relay name | RM35HZ21FM |
| Relay monitored parameters | Overfrequency and underfrequency 50 or 60 Hz |
| Time delay type | Adjustable 0.1...10 s, +/- 10 % Tt- time delay upon fault |
| Switching capacity in VA | 1250 VA |
| Minimum switching current | 10 mA at 5 V DC |
| Maximum power consumption in VA | 6 VA AC |
| Measurement range | 40...70 Hz frequency |
| Utilisation category | AC-12 conforming to IEC 60947-5-1 AC-13 conforming to IEC 60947-5-1 AC-14 conforming to IEC 60947-5-1 AC-15 conforming to IEC 60947-5-1 DC-12 conforming to IEC 60947-5-1 DC-13 conforming to IEC 60947-5-1 DC-14 conforming to IEC 60947-5-1 |
| Reset time | 2000 ms time delay |
|---|---|
| Maximum switching voltage | 250 V AC/DC |
| [Us] rated supply voltage | 120...277 V AC |
| [Un] rated nominal voltage | AC non self-powered |
| Supply voltage limits | 102…308 V AC |
| control circuit frequency | 40...70 Hz |
| Width | 35 mm |
| Output contacts | 1 C/O + 1 C/O |
| Contacts material | Cadmium free |
| Nominal output current | 5 A |
| maximum input frequency | 70 Hz |
| Maximum measuring cycle | 200 ms measurement cycle as true rms value |
| delay at power up | 0.5 s |
| Hysteresis | 0.3 % fixed |
| Measurement accuracy | +/- 10 % of the full scale value in input +/- 10 % of the full scale value in time delay |
| Repeat accuracy | +/- 0.5 % for input and measurement circuit +/- 0.5 % for time delay |
| Measurement error | +/- 0.05 %/°C with temperature variation < +/- 1 % over the whole range with voltage variation |
| Threshold setting | -2...10 Hz -10...2 Hz |
| Marking | CE : 73/23/EEC CE : EMC 89/336/EEC |
| Overvoltage category | III conforming to IEC 60664-1 |
| Insulation resistance | > 500 MOhm at 500 V DC between supply and relay output conforming to IEC 60255-5 > 500 MOhm at 500 V DC between measurement and relay output conforming to IEC 60664-1 > 1 MOhm at 500 V DC between supply and measurement conforming to IEC 60255-5 > 500 MOhm at 500 V DC between supply and relay output conforming to IEC 60664-1 > 500 MOhm at 500 V DC between measurement and relay output conforming to IEC 60255-5 > 1 MOhm at 500 V DC between supply and measurement conforming to IEC 60664-1 |
| [Ui] rated insulation voltage | 400 V conforming to IEC 60664-1 |
| operating voltage tolerance | - 15 % + 10 % Un |
| Supply frequency | 50/60 Hz +/- 10 % |
| insulation | No galvanic insulation between supply and measurement |
| Operating position | Any position without derating |
| Connections - terminals | Screw terminals, 1 x 0.5...1 x 4 mm² (AWG 20...AWG 11) solid without cable end Screw terminals, 2 x 0.5...2 x 2.5 mm² (AWG 20...AWG 14) solid without cable end Screw terminals, 1 x 0.2...1 x 2.5 mm² (AWG 24...AWG 12) flexible with cable end Screw terminals, 2 x 0.2...2 x 1.5 mm² (AWG 24...AWG 16) flexible with cable end |
| Tightening torque | 0.6…1 N.m conforming to IEC 60947-1 |
| Housing material | Self-extinguishing plastic |
| local signalling | 1 LED green for power ON 1 LED yellow for correct frequency (high R1) 1 LED yellow for correct frequency (low R2) |
| Mounting support | 35 mm symmetrical DIN rail conforming to IEC 60715 |
| Electrical durability | 100000 cycles |
| Mechanical durability | 30000000 cycles |
| Operating rate | <= 360 operations/hour full load |
| control type | Without test button |
| Immunity to microbreaks | 10 ms |
|---|---|
| Electromagnetic compatibility | Emission standard for industrial environments conforming to IEC 61000-6-4 Emission standard for residential, commercial and light-industrial environments conforming to IEC 61000-6-3 Immunity for industrial environments conforming to NF EN/IEC 61000-6-2 |
| Standards | IEC 60255-6 NF EN 60255-6 |
| product certifications | GL UL CSA C-Tick GOST |
| Ambient air temperature for storage | -40…70 °C |
| ambient air temperature for operation | -20…50 °C |
| Relative humidity | 95 % at 55 °C conforming to IEC 60068-2-30 |
| Vibration resistance | 0.35 mm (f= 5…57.6 Hz) conforming to IEC 60068-2-6/IEC 60255-21-1 1 gn (f= 57.6…150 Hz) conforming to IEC 60068-2-6/IEC 60255-21-1 |
| Shock resistance | 15 gn for 11 ms conforming to IEC 60255-21-1 |
| IP degree of protection | IP20 (terminals) conforming to IEC 60529 IP30 (casing) conforming to IEC 60529 |
| Pollution degree | 3 conforming to IEC 60664-1 |
| Dielectric test voltage | 2 kV AC 50 Hz |
| Non-dissipating shock wave | 4 kV |
| Unit Type of Package 1 | PCE |
|---|---|
| Number of Units in Package 1 | 1 |
| Package 1 Height | 4.600 cm |
| Package 1 Width | 8.000 cm |
| Package 1 Length | 9.700 cm |
| Package 1 Weight | 126.000 g |
