| General ordering data | |
| Version | RTD isolating transformer, 2-/3-/4- wire RTD, Configurable, Input : Temperature, PT100, Output : 0(4)-20 mA, 0-10 V |
| Order No. | 8560700000 |
| Type | WAS5 PRO RTD |
| GTIN (EAN) | 4032248207312 |
| Qty. | 1 pc(s). |
| Available until | 2022-03-30 |
| Alternative product | 1176030000 |
| Dimensions and weights | |
| Depth | 112.4 mm |
| Depth (inches) | 4.425 inch |
| Width | 17.5 mm |
| Width (inches) | 0.689 inch |
| Length | 92.4 mm |
| Length (inches) | 3.638 inch |
| Net weight | 138 g |
| Temperatures | |
| Storage temperature | -20 °C…85 °C |
| Operating temperature | 0 °C…55 °C |
| Probability of failure | |
| MTTF | 270 a |
| Environmental Product Compliance | |
| REACH SVHC | Lead 7439-92-1 |
| SCIP | b25f3b7c-b874-4a4e-a8b2-4f423a7e2a65 |
| RoHS Compliance Status | Compliant with exemption |
| RoHS Exemption (if applicable/known) | 6c, 7a, 7cI |
| Input | |
| Line resistance in measuring circuit | 50 Ω for 3- and 4-conductor |
| Number of inputs | 1 |
| Sensor | PT100 (2-/3-/4- wire) |
| Temperature input range | Configurable, PT100: -200°C…850 °C, NI100: -60°C…+250 °C |
| Output | |
| Fine adjustment | ≥ ± 5 %, Version 1 and later: ≥ 12.5 % / potentiometer: 12.5%…25% |
| Load impedance current | ≤ 600 Ω |
| Number of outputs | 1 |
| Offset current | max. 100 µA |
| Offset voltage | max. 0.05 V |
| Output current | 0…20 mA, 4…20 mA |
| Output voltage, note | 0…10 V |
| Wire break detection | LED flashing (output value: > 20 mA, >10 V) |
| load impedance voltage | ≥ 1 kΩ |
| Output (digital) | |
| Status indicator | Module active: LED on/ wire breakage: LED flashing/Error: LED off |
| General data | |
| Accuracy | < 0.3 % of measured value |
| Configuration | DIP switch, Potentiometer |
| Galvanic isolation | 3-way isolator |
| Linearity | Yes |
| Power consumption | 830…880…980 mW at IOUT = 20 mA |
| Protection degree | IP20 |
| Rail | TS 35 |
| Step response time | fast/slow: 2-/3-/4-conductor: 1.2 s/2.2 s; potentiometer: 0.5 s/1.1 s |
| Temperature coefficient | |
| Insulation coordination | |
| EMC standards | EN 55011, EN 61000-6 |
| Galvanic isolation | 3-way isolator |
| Impulse withstand voltage | 4 kV |
| Insulation voltage | 2 kVeff / 5 s |
| Insulation voltage input or output/rail | 4 kVeff / 1 min. |
| Insulation voltage input or output/supply | 2 kVeff / 5 s |
| Pollution severity | 2 |
| Rated voltage | 300 V |
| Surge voltage category | III |
| Connection data | |
| Type of connection | Screw connection |
| Stripping length, rated connection | 7 mm |
| Tightening torque, min. | 0.4 Nm |
| Tightening torque, max. | 0.5 Nm |
| Clamping range, rated connection | 2.5 mm² |
| Clamping range, min. | 0.5 mm² |
| Clamping range, max. | 2.5 mm² |
