| DC operation | |
| Nominal input voltage range | 12 V DC … 24 V DC |
| Input voltage range | 10 V DC … 30 V DC |
| Voltage type of supply voltage | DC |
| Reverse polarity protection | yes, < 60 V |
| Nominal input current (IN) | 2x 20 A (-25 °C … 60 °C) |
| 1x 40 A (-25 °C … 60 °C) | |
| Maximum current Imax | 2x 30 A (-25 °C … 40 °C) |
| 1x 60 A (-25 °C … 40 °C) | |
| Transient surge protection | Varistor |
| Voltage drop, input/output | typ. 0.5 V |
| Nominal input voltage range | 12 V DC … 24 V DC |
| Input voltage range | 10 V DC … 30 V DC |
| Input voltage range DC | 10 V DC … 30 V DC |
| Efficiency | > 97 % |
| Nominal output voltage | UIn – 0,5 V |
| Nominal output current (IN) | 40 A (Increasing power) |
| 20 A (Redundancy) | |
| Derating | 60 °C … 70 °C (2.5 %/K) |
| Power loss nominal load max. | 10 W (IOUT = 20 A) |
| Connection in series | no |
| Derating | 60 °C … 70 °C 2.5 %/K |
| Input | |
| Connection method | Screw connection |
| Conductor cross-section, rigid min. | 0.2 mm² |
| Conductor cross-section, rigid max. | 6 mm² |
| Conductor cross-section flexible min. | 0.2 mm² |
| Conductor cross-section flexible max. | 4 mm² |
| Conductor cross-section AWG min. | 12 |
| Conductor cross-section AWG max. | 10 |
| Stripping length | 8 mm |
| Screw thread | M3 |
| Tightening torque, min | 0.5 Nm |
| Tightening torque max | 0.6 Nm |
| Output | |
| Connection method | Screw connection |
| Conductor cross-section, rigid min. | 0.5 mm² |
| Conductor cross-section, rigid max. | 16 mm² |
| Conductor cross-section flexible min. | 0.5 mm² |
| Conductor cross-section flexible max. | 16 mm² |
| Conductor cross-section AWG min. | 10 |
| Conductor cross-section AWG max. | 6 |
| Stripping length | 10 mm |
| Screw thread | M4 |
| Tightening torque, min | 1.2 Nm |
| Tightening torque max | 1.5 Nm |
