Pepperl+Fuchs LFL2-CK-U-PVC5 Float Switch

Series		LFL2-**-U
Construction type		sleeve design

Contact loading		250 V AC/3 A; 150 V DC/0.25 A resistive load; 60 V DC/1 A resistive load
Rated insulation voltage		300 V
Pulse withstand voltage		4 kV
Electrical life		≥ 5 x 10⁴ switching cycles

Installation conditions

Installation instructions

range of application and minimum length between mounting and float:
≥ 100 mm (4 inch), preferred for fuels, heating oils, oily fluids
mounting:
– The float switch is mounted either from sidewards through a cable gland ≥ G1A into the vessel or
– by means of a counter weight or rods (e. g. float switch combination) from the top.
The pivot of the cable should always be horizontal.

Process conditions