Heavy-Duty Workover Rig

Mainly used for the workover service of 8000m depth (2-7/8″ oil tubing) oil and water well.

Adopt special carriers, which are made by Rigwell inustrial.

The main parts and components such as Crown block, Mast and Travelling system etc. meet APl standards.

Swivel, Rotary Hose, Links, Hydraulic tongs,Pneumatic slips, Square bushing, Rotary table and Substructure (including Slide and Ladder etc.) are optional.

Model				XJ900	XJ1000	XJ1350	XJ1600	XJ1800	XJ2250
Max. hook load			(kN)	900	1000	1350	1600	1800	2250
Norminal workover depth	Small	73mm oil tubing	(m)	4000	5500	7000	8500
	Large	73mm drill pipe	(m)	3200	4500	5800	7000	8000	9000
		88.9mm drill pipe	(m)	2500	3500	4500	5500	6500	7500
		114mm drill pipe	(m)			3600	4200	5000	6000
Rated hook load			(kN)	600	800	1000	1200	1500	1800
Drawworks power			(kW)	257-330	280-400	330-450	400-500	450-600	550-735
Mast height			(m)	29/31	31/33/35			36/38
Carrier driving type				8×8	10×8	10×8 12×8	12×8	14×8	14×10
Wire line Dia.			(mm)	26			26/29	29/32	32
Max. fastline pull of main drum			(kN)	180	210	210	210	280	280
Engine power			(kW)	350/375	540	540	630	2×540	2×630