NOV MISSION PUMP PARTS

2        SLEEVE, SHAFT (MECH) 416SS, FOR CENTRIFYGAL PUMP, MODEL: MAGNUM, MAKE: MISSION, P/N: 20943-21

3        STUFFING BOX COVER FOR MECHANICAL SEAL OF CENTRIFUGAL PUMP, MAKE – SPD

MUD HOG, MISSION PART NO. 22223-01-30A, OLD P/N: 052136410

4        SEAL INBOARD, CENTRIFUGAL PUMP COMMON SPARES, (NPN 648408300), P/N:

20619-01

5        SEAL OUT BOARD, CENTRIFUGAL PUMP COMMON SPARES, (NPN 648408359), P/N:

20619-02

6        IMPELLER, 12.5″, FOR CENTRIFUGAL PUMP, TYPE : 8X6X14, MAKE: MISSION NOV,

OLD P/N: 19116-84-30, P/N: 10342972-001

1        MECHANICAL SEAL , FOR CENTRIFUGAL PUMP, P/N 22451-1 (MISSION P/N:

648414308), P/N: H224511A

2        GLAND PACKING GRAPHITE F/ CENT. PUMP 250 P/N: 25014-04M-B MAKE: MISSION

P/N: 661007005)

3        SEAL, SHAFT SLEEVE FOR MISSION SUPREME PUMP, MODEL 2500, P/N: 648415156

4        SEAL, IMPELLER FOR CENTRIFUGAL PUMP SIZE – 2 X 3 X 13 WITH 2.1/2″ SHAFT.

MISSION PART NO. – 648405082

5        SLINGER WATER ASSY, FOR MAGNUM 8X6X14 PUMPS, MAKE: MISSION, P/N: 641116108

6        20626A INBOARD BEARING COVER FOR MAGNUM PUMPS, MAKE- MISSION, PART NO:

641103361 (NOV RATE CONTRACT)

7        CASING GASKET FOR CENTRIFUGAL PUMP, MAKE SPD MUD HOG, SIZE – 2.5″.

MISSION PART NO. 10399-46-1, P/N: 052137100

8        BOLT, IMPELLER, CENTRIFUGAL PUMPS – 2. 1/2″, 8″ X 6″, MISSION MCM,

DOUBLE LIFE, OLD P/N: 7415648, P/N: 7415648+80

1        BEARING INBOARD, CENTRIFUGAL PUMP COMMON SPARES, (NPN 661009010A), P/N:

20615-1

2        SEAL INBOARD, CENTRIFUGAL PUMP COMMON SPARES, (NPN 648408300), P/N:

20619-01

3        SEAL OUT BOARD, CENTRIFUGAL PUMP COMMON SPARES, (NPN 648408359), P/N:

20619-02

4        GLAND PACKING GRAPHITE F/ CENT. PUMP 250 P/N: 25014-04M-B MAKE: MISSION

P/N: 661007005)

5        MECHANICAL SEAL , FOR CENTRIFUGAL PUMP, P/N 22451-1 (MISSION P/N:

648414308), P/N: H224511A

6        648408201S OUTBOARD BEARING SET ( 2 BRNG SET) FOR MAGNUM PUMPS, MAKE-

MISSION, PART NO: 648408201S (NOV RATE CONTRACT)

7        SLEEVE, SHAFT (MECH) 416SS, FOR CENTRIFYGAL PUMP, MODEL: MAGNUM, MAKE: MISSION, P/N: 20943-21

8        SHAFT SLEEVE ASSY., 416 SS, FOR CENTRIFUGAL PUMP, TYPE : 8X6X14/4X3X13, MAKE: MISSION NOV, P/N: 20613-21G-7A

9        BOLT, IMPELLER, CENTRIFUGAL PUMPS – 2. 1/2″, 8″ X 6″, MISSION MCM,

DOUBLE LIFE, OLD P/N: 7415648, P/N: 7415648+80

10        IMPELLER WASHER, CENTRIFUGAL PUMPS – 2. 1/2″, 8″ X 6″, MISSION MCM,

DOUBLE LIFE, P/N: 7300239

1        CASING GASKET FOR CENTRIFUGAL PUMP, MAKE SPD MUD HOG, SIZE – 2.5″.

MISSION PART NO. 10399-46-1, P/N: 052137100

2        SEAL, SHAFT SLEEVE FOR MISSION SUPREME PUMP, MODEL 2500, P/N: 648415156

3        BOLT, CASING JACK, FOR CENTRIFUGAL PUMP, MODEL: 2500 SUPREME, MAKE: NOV, P/N: 2538-1H

4        COVER, INBOARD BEARING FOR MISSION SUPREME PUMP, MODEL 2500, P/N: 17950 H

5        GASKET, INBOARD BEARING COVER FOR MISSIONSUPREME PUMP, MODEL 2500, P/N: 648408706

6        LABYRINTH SEAL, INBOARD BEARING COVER FOR MISSION SUPREME PUMP, MODEL 2500, P/N: 2564-4H

7        BOLT, I.B BEARING COVER, FOR CENTRIFUGAL PUMP, MODEL: 2500 SUPREME, MAKE: NOV, P/N: 3861-1H

8        BEARING INBOARD, CENTRIFUGAL PUMP COMMON SPARES, (NPN 661009010A), P/N:

20615-1

9        20624-01-01 OUTBOARD BEARING HOUSING FOR MAGNUM PUMPS, MAKE- MISSION,

PART NO: 644308504 (NOV RATE CONTRACT)

10        SEAL, OUTBOARD BEARING HOUSING, FOR MISSION SUPREME PUMP, MODEL 2500, P/N: 648402295

11        BOLT, O.B. BEARING HOUSING, FOR CENTRIFUGAL PUMP, MODEL: 2500 SUPREME, MAKE: NOV, P/N: 3861-138

12        STUFFING BOX COVER BOLT FOR CENTRIFUGAL PUMP, MAKE SPD MUD HOG, SIZE –

2.5″. MISSION PART NO. 3861-117, P/N: WWG31H187

13        NUT, O.B. BEARING HOUSING JAM, FOR CENTRIFUGAL PUMP, MODEL: 2500 SUPREME, MAKE: NOV, P/N: 658404702

14        O-RING, OUTBOARD BEARING COVER, FOR MISSION SUPREME PUMP MODEL 2500, P/N: 72200017

15        LOCK NUT, OUTBOARD BEARING, FOR MISSION SUPREME PUMP, MODEL 2500, P/N: 648402055

16        LOCK WASHER, OUTBOARD BEARING, FOR MISSION SUPREME PUMP, MODEL 2500, P/N: 648402105

17        LABYRINTH SEAL, OUT BOARD BEARING COVER, BUNA-N, PROCESS: 2564-3H, FOR PUMP MISSION, MODEL: 2500 SUPREME, MAKE: NOV, P/N: H2564-3

18        BOLT, O.B. BEARING COVER, FOR CENTRIFUGAL PUMP, MODEL: 2500 SUPREME, MAKE: NOV, P/N: 3861-139-4

19        648408201S OUTBOARD BEARING SET ( 2 BRNG SET) FOR MAGNUM PUMPS, MAKE-

MISSION, PART NO: 648408201S (NOV RATE CONTRACT)

20        GLAND SET FOR CENTRIFUGAL PUMP,MAKE – SPD MUD HOG, SIZE – 2.5″. MISSION

PART NO. 20622A, P/N: 052136500

21        MECHANICAL SEAL , FOR CENTRIFUGAL PUMP, P/N 22451-1 (MISSION P/N:

648414308), P/N: H224511A

22        PACKING, SHAFT FOR MISSION SUPREME PUMP, MODEL 2500, P/N: 648402600

23        B3701A GLAND BOLT ASSEMBLY FOR MAGNUM PUMPS, MAKE- MISSION, APRT NO:

601102494

24        SHAFT, CENTRIFUGAL PUMP COMMON SPARES, (NPN 646490557), P/N: 20612-02-33

25        SLEEVE, SHAFT (MS PUMP) FOR MISSION SUPREME PUMP, MODEL 2500, P/N: 646492505