| [Technical Performance] | |
| Mounted Base Resonance | 5kHz min |
| Velocity Ranges | see: ‘How To Order’ below ±10% |
| Nominal 80Hz at 22°C | |
| Frequency Response | 10Hz (600cpm) to 1kHz (60kcpm) ± 5% – ISO10816 |
| Isolation | Base isolated |
| Range | 50g peak |
| Transverse Sensitivity | Less than 5% |
| [Mechanical] | |
| Case Material | Stainless Steel |
| Sensing Element/Construction | PZT/Compression |
| Mounting Torque | 8Nm |
| Weight | 150gms (nominal) |
| Connector | HS-AA004 – non-booted |
| HS-AA053 or HS-0054 – booted | |
| Mounting Threads | see: ‘How To Order’ below |
| [Electrical] | |
| Current Output | 4-20mA DC proportional to Velocity Range |
| Supply Voltage | 15-30 Volts DC (for 4-20mA) |
| Settling Time | 2 seconds |
| Output Impedance | Loop Resistance 600 Ohms max. at 24 Volts |
| Case Isolation | >108 Ohms at 500 Volts |
| [Environmental] | |
| Operating Temperature Range | .-25 to 120ºC |
| Sealing | IP68 |
| Maximum Shock | 5000 g |
| EMC | EN61326-1:2013 |
| Product Prefix M – IRD Mechanalysis |
Product Series 591 – Industrial Vibration Sensor |
Cable Length (if integral cable) QXX – length specified in metres |
||||||||||||
| ↑ | ↑ | ↑ | ||||||||||||
| 丨 | 一 | 一 | 一 | 一 | 一 | 一 | ||||||||
| M | 5 | 9 | 1 | X | X | X | X | X | X | X | X | X | X | X |
| 丨 | 一 | 一 | 一 | 一 | 一 | 一 | 一 | |||||||
| ↓ | ↓ | ↓ | ↓ | |||||||||||
| Extra Options (if required) F – Filtered P – Peak Range I – Intrinsically Safe PP – Peak to Peak Range L – 316L Stainless Steel RT – Temperature Output PT100 S – 90° Side Exit T – Temperature Output |
Velocity Range (RMS unless specified) 010 – 0-10 mm/sec 020 – 0-20 mm/sec 025 – 0-25 mm/sec 050 – 0-50 mm/sec 100 – 0-100 mm/sec |
Cable/Connector 01 – PUR 02 – Braided 07 – Silicon 08 – Flame Retardant 50 – 2 Pin MS 54 – M12 |
Mounting Threads 01 – ¼-28” UNF Female 02 – ¼-28” UNF Male 05 – Quick Fit Female 06 – M6 x 1mm Male 08 – M8 x 1.25mm Male 10 – M10 x 1.5mm Male |
|||||||||||
