rig-well.com

Welcome To Rigwell Industrial - Your Trusted Partner
LOGO-网站logo
Menu
  • rig-well@rig-well.com
  • +86 -15002958129
IFM PI1704 Sensor PI-010-REA01-MFRKG/US/ /P

IFM PI1704 Sensor PI-010-REA01-MFRKG/US/ /P

Flush pressure sensor with display
SKU: RWHD580U6Z2406

Product characteristics

Number of inputs and outputs Number of digital outputs: 2; Number of analogue outputs: 1
Measuring range
-1…10 bar -14.6…145 psi -0.1…1 MPa
Process connection threaded connection G 1 external thread Aseptoflex Vario

Application

Special feature Gold-plated contacts
Application flush mountable for the food and beverage industry
Media viscous media and liquids with suspended particles; liquids and gases
Medium temperature[°C] -25…150
Min. bursting pressure
150 bar 2175 psi 15 MPa
Pressure rating
50 bar 725 psi 5 MPa
Vacuum resistance
-1000 mbar -0.1 MPa
Type of pressure relative pressure; vacuum
No dead space yes
MAWP for applications according to CRN[bar] 10

Electrical data

Min. insulation resistance[MΩ] 100; (500 V DC)
Protection class III
Reverse polarity protection yes
Integrated watchdog yes
2-wire
Operating voltage[V] 20…30 DC
Current consumption[mA] 3.5…21.5
Power-on delay time[s] < 1
3-wire
Operating voltage[V] 18…30 DC
Current consumption[mA] 5…45; (430 bei max. Laststrom)
Power-on delay time[s] < 0.5

Inputs / outputs

Number of inputs and outputs Number of digital outputs: 2; Number of analogue outputs: 1

Outputs

Total number of outputs 2
Output signal switching signal; analogue signal; IO-Link
Electrical design PNP/NPN
Number of digital outputs 2
Output function normally open / normally closed; (parameterisable)
Number of analogue outputs 1
Analogue current output[mA] 4…20, invertible; (scalable)
Short-circuit protection yes
Type of short-circuit protection pulsed
Overload protection yes
2-wire
Max. load[Ω] 300
3-wire
Max. voltage drop switching output DC[V] 2
Permanent current rating of switching output DC[mA] 100
Switching frequency DC[Hz] 125
Max. load[Ω] (Ub – 10 V) / 21,5 mA; 650 Ω (Ub = 24 V)

Measuring/setting range

Measuring range
-1…10 bar -14.6…145 psi -0.1…1 MPa
Set point SP
-0.99…10 bar -14.3…145 psi -0.099…1 MPa
Reset point rP
-1…9.99 bar -14.5…144.8 psi -0.1…0.999 MPa
Analogue start point
-1…8 bar -14.5…116 psi -0.1…0.8 MPa
Analogue end point
1…10 bar 14.5…145 psi 0.1…1 MPa
Min. difference between SP and rP
0.02 bar 0.3 psi 0.002 MPa
In steps of
0.01 bar 0.1 psi 0.001 MPa
Factory setting
SP1 = 2.50 bar rP1 = 2.30 bar
SP2 = 7.50 bar rP2 = 7.30 bar
ASP = 0.00 bar AEP = 10.00 bar
dAP = 0.06 s dAA = 0.06 s
Temperature monitoring
Measuring range
-25…150 °C -13…302 °F

Accuracy / deviations

Switch point accuracy[% of the span] < ± 0,2; (DIN EN IEC 62828-1; Turn down 1:1)
Repeatability[% of the span] < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1)
Characteristics deviation[% of the span] < ± 0,2; (DIN IEC EN 62828-1 incl. zero point and span error, non-linearity, hysteresis; Turn down 1:1)
Linearity deviation[% of the span] < ± 0,15; (Turn down 1:1)
Zero-point stabilisation[% of the span]
IO-Link, analogue output 0,15; (see operating instructions zero-point behaviour)
display, switching output 0,2
Hysteresis deviation[% of the span] < ± 0,15; (Turn down 1:1)
Long-term stability[% of the span] < ± 0,1; (Turn down 1:1; per year)
Total deviation over temperature range
Temperature range total deviation
-25…15 °C Characteristics deviation ± 0,05 % of the span / 10 K
15…80 °C Characteristics deviation
80…150 °C Characteristics deviation ± 0,1 % of the span / 10 K
Notes on the accuracy / deviation for further details see section Diagrams and graphs
Temperature monitoring
Accuracy[K] ± 2,5+ (0,08 x ( Umgebungstemperatur – Mediumtemperatur ))
Repeatability[K] ± 0,2
Resolution[K] 0.2

Response times

Damping process value dAP[s] 0…99.99
Damping for the analogue output dAA[s] 0…99.99
2-wire
Step response time analogue output[ms] 30
3-wire
Min. response time of switching output (dAP)[ms] 3
Step response time analogue output[ms] 7

Interfaces

Communication interface IO-Link
Transmission type COM2 (38,4 kBaud)
IO-Link revision 1.1
SDCI standard IEC 61131-9
Profiles
Common – I&D Identification and Diagnosis
Function Measurement data, high resolution
SIO mode yes
Required master port type A
Min. process cycle time[ms] 5.6
IO-Link resolution pressure[bar] 0.0005
IO-Link resolution temperature[K] 0.2
IO-Link process data (cyclical)
function bit length
pressure 32
temperature 32
device status 4
binary switching information 2
IO-Link functions (acyclical) application specific tag; internal temperature; operating hours counter; switching cycles counter; Pressure peak counter; measuring cell diagnosis
Supported DeviceIDs
Type of operation DeviceID
default 1156

Operating conditions

Ambient temperature[°C] -25…80
Storage temperature[°C] -40…100
Protection IP 67; IP 68; IP 69K

Tests / approvals

EMC
DIN EN 61326-1
Shock resistance
DIN EN 60068-2-27 50 g (11 ms)
Vibration resistance
DIN EN 60068-2-6 20 g (10…2000 Hz)
MTTF[years] 214
UL approval
UL approval no. J048
File number UL E174189

Mechanical data

Weight[g] 360
Housing cylindrical
Dimensions[mm] Ø 50 / L = 107
Materials Housing: stainless steel (316L/1.4404); pushbuttons: PBT; sealings: FKM; M12 connector: PEI; Display: PFA; ventilation diaphragm: PTFE
Materials (wetted parts) measuring cell: ceramics (99.9 % Al2O3); Process connection: stainless steel (316L/1.4435) surface characteristics: Ra < 0,4 µm / Rz = 4 µm; Sealing: PTFE
Min. pressure cycles 100 million
Tightening torque[Nm] 35
Process connection threaded connection G 1 external thread Aseptoflex Vario

Displays / operating elements

Display
Display unit LED, green
switching status LED, yellow
function display alphanumeric display, 4-digit
measured values alphanumeric display, 4-digit
Display unit bar; psi; MPa

Remarks

Pack quantity 1 pcs.

Electrical connection

Connection Connector: 1 x M12; coding: A; Contacts: gold-plated
Weight 0.4 kg

Related products

error:
Scroll to Top